8 calculators

Industry & business calculators

Motors, compressed air, boilers, steam, data centres, demand charges and industrial energy audits.

Industry & business

Motor & VFD savings

Compare an existing motor with an IE3, IE4 or IE5 replacement using IEC 60034-30-1 efficiency classes, add a variable-speed drive for fans and pumps (affinity laws), and see the kWh, money and CO₂ saved and the payback.

Industry & business

Compressed air leaks

Flow through leaks of any size at your system pressure (choked-orifice formula), the compressor power and electricity they waste, the yearly cost and CO₂, the leak rate as a share of compressor capacity, and the payback of a repair campaign.

Industry & business

Steam cost per tonne

Cost of generating one tonne of steam from the boiler pressure, superheat, feedwater temperature, blowdown and boiler efficiency for gas, oil, coal, biomass or electric boilers, with hourly fuel use, annual cost, CO₂ and the value of condensate return.

Industry & business

Chiller energy & kW/TR

Annual electricity use and cost of a chiller plant from cooling capacity (TR or kW), average load, kW/TR or COP and auxiliaries, with the savings and payback of a more efficient chiller.

Industry & business

Data centre PUE

Work out the power usage effectiveness (PUE) of a data centre from its IT load, cooling, UPS and other losses, or start from a known PUE, then see annual energy, cost, CO₂ and water, and what a lower PUE would save.

Industry & business

Mining electricity cost

Electricity use and cost of proof-of-work mining hardware from hashrate and efficiency (J/TH), with cooling overhead and uptime, plus the break-even electricity price for a given hashprice and the CO₂ on your grid.

Industry & business

Demand charges & peak shaving

Split a commercial electricity bill into energy and demand charges, compute the load factor and the effective price per kWh, apply a ratchet clause, and see what shaving the peak (by load control or a battery) would save.

Industry & business

Time-of-use savings

Compare a time-of-use tariff with a flat rate, see how much moving consumption from peak to off-peak hours saves (directly or through a battery with round-trip losses), and find the peak share at which the TOU tariff stops paying off.

How to choose the right calculator

In most factories the biggest savings sit in a few systems. Motors use about two-thirds of industrial electricity, and the motor energy savings calculator compares IE efficiency classes and variable-speed drives with payback. Compressed air leaks are often the quickest win of all, and the steam cost calculator prices every tonne of steam and shows what condensate return and boiler efficiency are worth. In hot climates, the chiller energy calculator covers the cooling plant, and data centre PUE does the same for server halls.

The way you are billed matters as much as how much you use. The demand charge calculator shows how much of a commercial bill comes from the monthly peak and what shaving it saves, and time-of-use savings values moving consumption to cheaper hours. The mining electricity calculator turns hashrate and J/TH into kWh, power cost and a break-even electricity price.

Other categories

All calculators →
Solar 8Wind 5Batteries & storage 5Hydro & marine 3Home energy 12Heating & gas 14EV & transport 8Carbon & climate 6Energy finance 7Bio, geo & hydrogen 3Oil, fuel & driving 7Power plants & fossil 5Electrical engineering 4Malaysia 6Converters & physics 9