Power plants & fossil calculators
Coal, gas, oil and nuclear plant output, heat rate, fuel burn, uranium and generation economics.
Heat rate ↔ efficiency
Convert between thermal efficiency and heat rate (Btu/kWh, kJ/kWh, kcal/kWh, GJ/MWh) on an LHV or HHV basis, then see how much coal, gas, oil or biomass a plant burns per MWh and per year, what the fuel costs and how much CO₂ it emits.
Power plants & fossilCoal power plant
From capacity, capacity factor, efficiency and coal quality: how many tonnes of coal a power station burns per hour, day and year, how much CO₂, ash and SO₂ it produces, and what each MWh costs in fuel and carbon.
Power plants & fossilGas turbine fuel use
How much natural gas a gas turbine, combined-cycle plant or gas engine burns per hour and per year in MMBtu, GJ, m³ and scf, including part-load and hot-weather penalties, plus fuel cost and CO₂ per MWh.
Power plants & fossilNuclear fuel & burnup
How much enriched fuel, natural uranium (U₃O₈) and separative work a reactor needs each year from its power, efficiency, capacity factor and burnup, and what the front-end fuel cycle costs per MWh.
Power plants & fossilUranium enrichment (SWU)
Separative work units, natural uranium feed and depleted tails for any product and tails assay, the cost per kg of enriched uranium from U₃O₈, conversion and SWU prices, and the tails assay that minimises that cost.
How to choose the right calculator
Every thermal power station comes down to one number: how much fuel it burns per MWh. The heat rate calculator converts efficiency into Btu/kWh, kJ/kWh or GJ/MWh on an LHV or HHV basis and turns it into fuel, cost and CO₂ per MWh. For specific plants, the coal power plant calculator gives tonnes of coal, ash and SO₂ per year for any coal rank, and gas turbine fuel consumption handles open-cycle, combined-cycle and gas-engine plants at part load and in hot weather.
Nuclear fuel is counted differently, by burnup rather than calorific value. The nuclear fuel calculator works out the enriched fuel, natural uranium and separative work a reactor needs each year and the fuel cost per MWh, and the SWU calculator does the enrichment mass balance for LEU and HALEU and finds the cheapest tails assay. To compare all of them on full lifetime cost, finish with the LCOE calculator.