End use

Heat: the biggest energy end use, explained

Heat is the largest energy end use in the world, ahead of transport and electricity. Most of it still comes from burning fossil fuels.

What it is and how it is used

About half of all final energy is used as heat, according to the IEA: in industry for processes such as steam, drying, melting and chemical reactions; in buildings for space heating, hot water and cooking; and in agriculture. Most of this heat is made on site by burning gas, oil, coal or biomass, so it rarely shows up in electricity statistics.

Industrial heat is split by temperature. Low and medium temperatures (below about 200 °C), used in food, paper and chemicals, can be supplied by heat pumps, solar thermal and electric boilers. High temperatures for steel, cement and glass are harder and rely on electric furnaces, hydrogen, biomass or carbon capture.

In buildings, heat pumps are the main low-carbon option: they move heat from outside air, ground or water and deliver three to four times more heat than the electricity they use. District heating networks distribute heat from combined heat and power plants, waste incinerators, geothermal wells, large heat pumps or industrial waste heat, and supply much of the heat in Nordic countries and cities in China and Eastern Europe.

Insulation and airtightness come first: the cheapest heat is the heat you do not need. Open data on heat use by country is not consistent enough for country pages, so this page links to the tools for estimating and comparing heating costs.

Country-level open data for heat is not published in a consistent form, so this page has no per-country pages. See the related sources below.

Calculators, guides and maps

Calculators

Heat pump running costFree air-source heat pump calculator: heat demand, COP vs outdoor & flow temperature, SCOP, kW size, monthly electricity, running cost vs gas/oil/LPG and CO₂.Heat pump vs gas boilerHeat pump vs gas boiler: running cost, upfront and maintenance, 15-year total cost of ownership, CO₂ and the break-even electricity-to-gas price ratio.Heating cost comparisonCompare heating costs: gas, LPG, oil, electric, air & ground source heat pumps, pellets, logs and district heating: cost per useful kWh, annual cost, CO₂.Degree days & heat demandHeating and cooling degree days (HDD, CDD) for any location from NASA climate data, with building heat demand in kWh, design heat load in kW, fuel use and heating cost.Ground source heat pumpGround source heat pump calculator: kW size, borehole length or horizontal loop area by ground type (VDI 4640), SCOP, running and installed cost vs air source.Solar water heater sizingSolar water heater calculator (f-chart): collector area, tank size and monthly solar fraction from NASA climate data. Savings vs electric, gas or heat pump, payback, CO₂.Insulation savingsInsulation savings calculator: U-values before/after for walls, roof, windows and floor + degree days → kWh and money saved, CO₂ and payback per measure.New boiler savingsBoiler efficiency savings calculator: old vs new condensing gas, LPG or oil boiler, fuel and money saved per year, payback, CO₂, and effect of flow temperature.Steam cost per tonneSteam cost calculator: cost per tonne of steam from pressure, feedwater temperature, boiler efficiency and fuel price; fuel per hour, annual cost and CO₂.Space heater costSpace heater running cost per hour, day, month and winter for oil-filled, fan, infrared, heat pump, LPG and kerosene heaters, plus room heat-need check.

Frequently asked questions

How much of the world's energy is used for heat?
About half of final energy consumption, more than transport (about 30%) or electricity uses other than heating.
What is the cheapest way to heat a home?
It depends on local prices and the building. In a well-insulated home a heat pump is usually cheapest to run; the heating cost comparison calculator compares fuels with your own prices.
What is district heating?
A network of insulated pipes that delivers hot water from a central source, such as a CHP plant, waste incinerator, geothermal well or large heat pump, to many buildings.
Can industry use heat pumps?
Yes, for process heat up to roughly 150–200 °C, which covers a large share of food, drink, paper and chemical industry needs.

Other energy sources

Sources & references

  1. Our World in Data, Energy dataset (Energy Institute Statistical Review of World Energy; Ember), CC BY 4.0
  2. Energy Institute, Statistical Review of World Energy
  3. Ember, Yearly Electricity Data
  4. IEA, Renewables: heat

Data: Energy Institute Statistical Review of World Energy and Ember (via Our World in Data, CC BY 4.0), IRENA, U.S. EIA, WRI. Built November 2026.