When people talk about decarbonising energy, they usually mean electricity and cars. Industrial heat gets less attention, even though it is one of the biggest energy uses on Earth. Steelworks, cement kilns, chemical plants, paper mills and food factories burn fuel mostly to make heat, from warm water for washing bottles to 1,500 °C flames in a cement kiln. According to the IEA, heat makes up about two-thirds of industrial energy demand and roughly a fifth of global final energy use, and around 90% of it still comes from fossil fuels. This guide explains where that heat goes and which options can replace the fuel.
How big is industrial heat?
Industry uses around 37–38% of global final energy, according to IEA balances, and most of that is heat rather than motors or lighting. Coal is the largest single source, because China’s steel and cement sectors are so large, followed by natural gas and oil. Renewable heat, mostly bioenergy burned in pulp and paper, sugar and food industries, supplies only about a tenth.
Temperature is the deciding factor for which alternatives can work. A common split, based on studies by the IEA, the EU’s JRC and others:
| Temperature band | Share of industrial heat (approx.) | Typical uses |
|---|---|---|
| Below 100 °C | ~25–30% | Washing, drying, pasteurising, space heating in factories |
| 100–400 °C | ~20–25% | Steam for chemicals, food, paper, textiles, distillation |
| Above 400 °C | ~45–50% | Iron and steel, cement and lime, glass, ceramics, petrochemical cracking |
Nearly half of industrial heat sits in the hardest band, above 400 °C.
Who uses it
| Sector | Main heat needs | Notes |
|---|---|---|
| Iron and steel | Blast furnace and coke ovens (>1,500 °C), reheating | About 7–9% of global CO₂ emissions; coal is both fuel and reducing agent |
| Cement | Kiln at ~1,450 °C to make clinker | About 7–8% of global CO₂; around 60% from limestone chemistry |
| Chemicals | Steam crackers (~850 °C), steam for reactors and distillation | Largest industrial energy user by fuel input, much of it feedstock |
| Pulp and paper | Steam at 120–200 °C for drying | Already largely bio-fuelled in Nordic countries and the US |
| Food and drink | Hot water and steam below 200 °C | Ideal for heat pumps and electric boilers |
| Glass and ceramics | Furnaces at 1,000–1,600 °C | Electric melting already used for some glass |
Option 1: industrial heat pumps
A heat pump moves heat from a low-temperature source, such as factory waste heat, cooling water or ambient air, up to a useful temperature. At high temperature lifts the COP falls, but because industrial plants usually have waste heat at 30–60 °C, a heat pump can still deliver 2 to 4 units of heat per unit of electricity.
Units on the market in 2024–2025 deliver hot water and steam at roughly 90–160 °C, with several suppliers offering 180–200 °C. Agora Industry estimated that heat pumps could technically cover around a third of industrial heat demand in Europe, mostly in food, paper and chemicals. The main barriers are price: in much of Europe, electricity per MWh costs two to three times as much as gas, which wipes out part of the efficiency gain.
At these assumed prices the two options cost about the same to run before carbon pricing, and the heat pump wins once carbon is counted. Rerun the sums with your own prices in the energy price converter and the heat pump calculator.
Option 2: electric boilers and furnaces
Electric resistance and electrode boilers convert electricity to steam at nearly 99% efficiency. They are cheap to buy and can switch on and off within minutes, so they suit plants that can run on cheap or surplus power and fall back on gas the rest of the time. Electric arc furnaces already make about 30% of the world’s steel from scrap, and induction, resistance and infrared heating are used in metals, glass and plastics.
Option 3: thermal batteries
Thermal batteries store electricity as heat in cheap materials and release it on demand. Rondo heats refractory bricks to over 1,000 °C; Kraftblock uses a granulate made from recycled materials; Antora heats carbon blocks until they glow. Storing heat in solid materials costs far less per kWh than storing electricity in lithium-ion cells, and the stored heat can feed steam boilers or hot-air processes around the clock while charging only during cheap hours. Projects of tens to hundreds of megawatt-hours were commissioned in the US and Europe in 2023–2025. See Energy Storage Technologies Compared for how this fits with other storage.
Option 4: biomass and biomethane
Biomass already supplies most renewable industrial heat, mainly where a plant has its own residues: bagasse in sugar mills, black liquor and bark in pulp mills, palm kernel shells and empty fruit bunches in Malaysian and Indonesian palm oil mills. Outside those cases, sustainable biomass supply is limited and contested (see biofuels explained).
Option 5: hydrogen
Burning hydrogen for low-temperature heat makes little sense: making it by electrolysis loses 30% or so of the energy, and a heat pump gives several times more heat per kWh of electricity. Hydrogen earns its place where it is a chemical input. The main example is direct reduced iron (DRI): hydrogen strips oxygen from iron ore, and the iron is melted in an electric arc furnace. Sweden’s HYBRIT pilot produced fossil-free sponge iron in 2021, and Stegra (formerly H2 Green Steel) is building a commercial plant in Boden. Gas-based DRI, with hydrogen added over time, is the step many steelmakers are taking first. Read hydrogen colours explained for why the source of the hydrogen matters.
Option 6: carbon capture
Cement is the clearest case for carbon capture, because process emissions from limestone cannot be avoided by switching fuel. Heidelberg Materials’ Brevik plant in Norway started capturing about 400,000 tonnes of CO₂ a year in 2025 for storage under the North Sea, the first full-scale capture plant at a cement works. Capture also applies to some steel, chemicals and waste-to-energy plants. See carbon capture and storage explained.
Other cement measures cut emissions without capture: replacing clinker with calcined clay and limestone (LC3), fly ash or slag; more efficient kilns; and using waste fuels.
Which option for which heat
| Heat need | Best-fit options today |
|---|---|
| Below 100 °C | Heat pumps, solar thermal, waste heat recovery, district heat |
| 100–200 °C steam | High-temperature heat pumps, electric boilers, thermal batteries, biomass |
| 200–500 °C | Electric boilers and heaters, thermal batteries, biomethane |
| Above 500 °C | Electric furnaces where proven, hydrogen, biomass, CCS (cement, lime) |
Where this leaves us
- Industrial heat is about a fifth of world final energy, mostly fossil, and nearly half of it is above 400 °C.
- Low- and medium-temperature heat can be electrified with heat pumps and electric boilers today; the obstacle is mostly the price ratio between electricity and gas.
- Thermal batteries turn cheap off-peak power into steady process heat.
- Hydrogen fits steelmaking better than boilers; CCS fits cement.
- Electricity prices and carbon prices decide the pace. Follow them on the electricity prices and carbon prices pages, and see where heat networks fit in district heating explained.
Calculators for this topic
Frequently asked questions
How much energy does industry use for heat?
Can heat pumps supply industrial heat?
Why is cement so hard to decarbonise?
What is a thermal battery?
Is hydrogen a good option for industrial heat?
Sources & references
- IEA: Renewables 2023: Renewable heat
- IEA: Net Zero Roadmap and Iron & Steel / Cement tracking reports
- Chatham House (2018). Making Concrete Change: Innovation in Low-carbon Cement and Concrete
- Agora Industry & FutureCamp (2024). Direct electrification of industrial process heat
- World Steel Association: Sustainability indicators
Figures in this guide are typical ranges drawn from the sources above; your own numbers depend on location, prices and equipment. Use the linked calculators for site-specific estimates.