Electrical engineering calculators
Power factor, transformers, UPS, generators, cables, short-circuit and electrical design basics.
Power factor correction
Size the capacitor bank (kVAr and µF per phase) that lifts a load from its present power factor to a target, then see the drop in current and kVA, the freed transformer capacity, the cut in cable losses and the money saved on kVA demand charges, kVArh charges or low-PF surcharges, with payback.
Electrical engineeringTransformer sizing
Pick the standard transformer rating for a load with future growth, then see the loading, primary and secondary currents, no-load and load losses, efficiency curve, annual loss cost and the secondary short-circuit current.
Electrical engineeringShort-circuit current
Three-phase prospective short-circuit current (kA) and peak current at the LV terminals of a transformer and at the end of a cable, from the upstream fault level, transformer kVA and impedance, cable size, length and material, using the IEC 60909 method.
Electrical engineeringGenerator sizing (kVA)
Size a diesel or gas generator set from the running load and the largest motor: running kVA, the starting kVA of the motor for DOL, star-delta, soft-starter or VFD starting, the voltage dip at each standard genset size, and the recommended standby or prime rating.
How to choose the right calculator
These tools cover the questions that come up when designing or upgrading a low-voltage installation. Transformer sizing picks the standard kVA rating for a load with growth margin and shows currents, losses and efficiency. The short-circuit current calculator then gives the fault level at the transformer and at the end of a cable, which sets the breaking capacity of every breaker downstream.
For backup and off-grid supplies, the generator sizing calculator checks both the running load and the voltage dip when the largest motor starts. Plants with many motors usually have a poor power factor; power factor correction sizes the capacitor bank in kVAr and µF and shows the savings on kVA or kVArh charges. Basic conversions such as kVA to kW and three-phase power are in the converters section.