How this degree days calculator works
The heat a building loses is proportional to the difference between inside and outside temperature, and to how long that difference lasts. Degree days capture both in one number for a climate. Once you know them, and how much heat your building loses per degree, the yearly heat demand is a single multiplication.
The calculator takes monthly mean temperatures from 1991–2020 climate normals for a list of cities, or from NASA POWER satellite climatology for any point you choose on the map. Monthly averages hide cold snaps and warm spells, so it spreads each month’s daily temperatures around the mean with a normal distribution (σ = 3.5 K), in the spirit of the Hitchin method described in CIBSE TM41. That way a month averaging 10 °C still collects some heating degree days on its colder days, even with a 10 °C base.
For the building, choose either floor area and insulation level (which sets a heat loss rate per m²) or enter a heat loss coefficient from an energy certificate or survey. The calculator then gives the yearly and monthly heat demand, the peak load on a cold day, the fuel needed and the cost.
The formula
H (W/K) = floor area × specific loss (3.0 uninsulated … 0.25 passive house W/m²K) Heat demand (kWh) = H × HDD × 24 ÷ 1000 Peak load (kW) = H × (indoor − design temperature) ÷ 1000 Design temperature = coldest monthly mean − 10 °C
Fuel = heat demand ÷ efficiency; Cost = fuel × price
Worked example
With the defaults: London, heating base 15.5 °C, cooling base 22 °C, a 120 m² house with average insulation (1.5 W/m²K), so H = 180 W/K, heated by a 90% gas boiler at €0.10/kWh.
- London’s monthly means run from 5.2 °C in January to 18.7 °C in July (11.4 °C annual mean). That gives about 1,844 heating degree days (3,320 °F·days) and only 21 cooling degree days.
- Each degree day costs the house 180 × 24 ÷ 1000 = 4.32 kWh of heat.
- Yearly heat demand: 4.32 × 1,844 ≈ 7,970 kWh, or 66 kWh per m².
- Peak load: the design temperature is 5.2 − 10 = −4.8 °C, so 180 × (21 + 4.8) ÷ 1000 ≈ 4.6 kW.
- Fuel: 7,970 ÷ 0.90 ≈ 8,850 kWh of gas, costing about €885 a year.
January alone needs about 1,380 kWh of heat; July about 43 kWh.
How to read the results
- Heating degree days is the climate’s heating severity at your chosen base. Compare cities only at the same base.
- Annual heat demand is useful heat, before boiler or heat pump losses.
- Peak heat load is what a boiler or heat pump must deliver on a cold day. It is the figure installers use for sizing; oversizing beyond it adds cost and, for heat pumps, cycling.
- kWh per degree day in the heat loss hint is your building’s weather-corrected fingerprint for tracking bills across years.
Typical values
| City | HDD, base 15.5 °C (approx.) | CDD, base 22 °C (approx.) |
|---|---|---|
| Madrid | 1,200–1,500 | 250–400 |
| London | 1,800–2,000 | under 50 |
| Berlin | 2,300–2,500 | under 50 |
| Chicago | 2,700–3,100 | 150–250 |
| Stockholm | 3,000–3,300 | under 30 |
| Kuala Lumpur | 0 | over 2,000 |
| Insulation level | Specific heat loss (W/m²K of floor) |
|---|---|
| Uninsulated, pre-1950 | 3.0 |
| Average, some upgrades | 1.5 |
| Good, post-2000 code | 1.0 |
| Passive house | 0.25 |
Tips for using degree days well
- Match the base to the building. A well-insulated home with lots of appliances may not need heat until 12–14 °C outside; using 15.5 °C would overstate its demand.
- Calibrate with your bills. Divide last winter’s heating energy by the degree days for the same months and compare with the calculator’s kWh per degree day.
- Size heating from the peak, not the annual total. Then check running costs with the heat pump calculator or heating cost comparison.
- Test upgrades. Change the insulation level to see how much demand and peak load fall, then price the work with insulation savings.
Limitations
Degree days estimated from monthly means are typically within 5–15% of values from daily weather records, and any single year can differ from the long-term normal by a similar amount. The heat loss model ignores solar gains beyond what the base temperature captures, thermal mass and ventilation habits. The cooling figure is a sensible-heat estimate without solar and internal gains or humidity, so it understates real air-conditioning loads. NASA satellite climatology has a resolution of about 50 km and can miss local effects such as cities, valleys and coasts.
Method & assumptions
HDD for a month = Σ over the days of max(0, base − daily mean), estimated from the monthly mean with a normal distribution of daily means (σ = 3.5 K). Annual heat demand = heat loss coefficient H (W/K) × HDD × 24 ÷ 1000. H = floor area × specific loss for the insulation level (3.0 W/m²K uninsulated … 0.25 passive house). Peak load = H × (indoor − design temperature), design temperature = coldest monthly mean − 10 °C. Fuel = heat ÷ efficiency.
Frequently asked questions
What are heating degree days?
What base temperature should I use?
How do I calculate heat demand from degree days?
How many heating degree days does London have?
What are cooling degree days used for?
How do I compare my heating bills between a mild and a cold winter?
Sources & references
Embed this calculator
Free for blogs, installers, schools and NGOs. Copy the code below; it updates itself automatically.