What this calculator does
Time-of-use (TOU) tariffs make electricity cheaper when the grid has spare capacity and more expensive at the evening peak. They are spreading quickly with smart meters, electric cars, heat pumps and solar. For businesses they have been standard for decades. A TOU tariff can lower your bill or raise it, depending on when you use power and how much of it you can move.
This tool compares your present TOU bill with a flat-rate alternative, shows how much moving part of the peak consumption to off-peak hours saves, and accounts for round-trip losses if the shifting is done with a battery or thermal storage. It also finds the break-even peak share: the point at which TOU stops beating the flat rate.
The formula
Shifting a share m of total use from peak to off-peak: Bill_after = kWh × ((peak − m) × P_peak + shoulder × P_shoulder + (off + m) × P_off) + m × kWh × (1 ÷ η − 1) × P_off (storage losses, η = round-trip efficiency)
Value per kWh shifted = P_peak − P_off ÷ η
Break-even peak share vs flat price F: p* = (F − s × P_shoulder − (1 − s) × P_off) ÷ (P_peak − P_off)
Worked example
The defaults describe a small business using 2,000 kWh a month, 45% in peak hours, 20% in the shoulder and 35% off-peak. Prices are 0.32 peak, 0.20 shoulder and 0.12 off-peak, against a flat offer of 0.22.
- TOU bill now: 2,000 × (0.45 × 0.32 + 0.20 × 0.20 + 0.35 × 0.12) = 452 a month. The flat rate would cost 440, so at present TOU is slightly worse.
- The break-even peak share is (0.22 − 0.04 − 0.8 × 0.12) ÷ 0.20 = 42%. At 45% the business is just over the line.
- Moving 15% of total use (300 kWh) to off-peak, for example by pre-cooling and running a batch process at night, cuts the bill to 392 a month. That saves 60 a month or 720 a year, and TOU now beats the flat rate by 48 a month.
The battery preset shows the effect of losses: at 90% round-trip efficiency, each shifted kWh needs 1.11 kWh of off-peak energy, so the value per kWh falls from 0.23 to about 0.21.
Typical shiftable loads
| Load | Share of use that can usually move | Comment |
|---|---|---|
| EV charging at home | 80–100% | Timer or smart charger |
| Electric water heating | 70–100% | Tank stores heat |
| Pool pump, irrigation | 70–100% | Run at night |
| Washing, drying, dishwashing | 30–70% | Delay-start functions |
| Building cooling | 10–30% | Pre-cooling or ice storage |
| Industrial batch processes | case by case | Scheduling, storage tanks |
How to read the results
- Saving from shifting is the yearly value of the move you entered. It assumes the shifted kWh are not lost or increased, except for storage losses.
- Break-even peak share answers whether the TOU tariff suits you at all. If your peak share is above it and cannot fall, stay on the flat rate.
- Value of each kWh shifted is the most a battery’s cost per delivered kWh can be before shifting with it loses money. Compare it with the levelized cost of storage.
- The line chart shows how the TOU bill rises with peak share while the flat bill stays level.
Limitations
Real tariffs often add standing charges, demand charges (see the demand charge calculator), weekend rates and seasonal periods. Some dynamic tariffs change price every half hour, which this simple three-period model cannot capture. Shifted loads sometimes use slightly more energy, for example pre-cooling a building earlier than needed. Battery wear is not counted in the bill comparison.
Method & assumptions
Bill = kWh × (peak share × peak price + shoulder share × shoulder price + off-peak share × off-peak price). Shifting moves a share of kWh from peak to off-peak; with storage the off-peak purchase is increased by 1 ÷ round-trip efficiency. Break-even peak share against a flat rate F: p* = (F − s·Ps − (1 − s)·Po) ÷ (Pp − Po), with s the shoulder share.
Frequently asked questions
What is a time-of-use electricity tariff?
Is a time-of-use tariff cheaper than a flat rate?
How much can I save by shifting load to off-peak?
Which loads are easiest to shift?
Does a home battery pay off on a TOU tariff?
What is the shoulder period?
Sources & references
Embed this calculator
Free for blogs, installers, schools and NGOs. Copy the code below; it updates itself automatically.