Energy basics guide

Energy Density of Fuels: MJ/kg and MJ/L Compared

Energy density of petrol, diesel, jet fuel, LPG, LNG, hydrogen, ammonia, coal, wood, uranium and batteries per kg and per litre, and why it matters.

Updated 5 min read 1,252 words

Why do airliners still burn kerosene while cars switch to batteries? Why does a hydrogen car need a 700-bar tank? Why does a single uranium fuel pellet replace a tonne of coal? The answer to all three is energy density: how much energy a fuel or storage medium packs into a kilogram or a litre. It decides what is practical for each job far more than any marketing claim, and it explains why some parts of the energy system are much harder to decarbonise than others.

Two kinds of density

Gravimetric energy density (specific energy) is energy per unit mass, usually in MJ/kg or Wh/kg. It matters most when weight is the limit: aircraft, rockets, portable devices, trucks near their legal weight limit.

Volumetric energy density is energy per unit volume, in MJ/L or kWh/m³. It matters when space is the limit: car fuel tanks, ship bunkers, storage sites and tankers.

A fuel can do well on one and badly on the other. Hydrogen is the best chemical fuel per kilogram and one of the worst per litre. Batteries are dense enough per litre to fit in a car floor but heavy per kilowatt-hour.

Fuels compared

All values are typical lower heating values (LHV), rounded. Real fuels vary with composition, and the fuel energy content calculator lets you check specific quantities.

Fuel / storage MJ/kg MJ/L Notes
Hydrogen, gas at 700 bar 120 ~5 Tank adds large weight
Hydrogen, liquid (−253 °C) 120 ~8.5 Liquefaction uses ~25–35% of its energy
Natural gas / methane, 1 atm 50 ~0.036 Too bulky to use without compression
CNG (200–250 bar) 50 ~9 Common in buses and taxis
LNG (−162 °C) 50 ~21–22 Shipping and long-distance trade
LPG (propane/butane, liquid) ~46 ~25 Liquid at modest pressure
Petrol 43–44 32–33 Density ~0.74 kg/L
Jet fuel (Jet A-1) ~43 ~34–35 Specification minimum 42.8 MJ/kg
Diesel ~43 ~36 Density ~0.83–0.84 kg/L
Heavy fuel oil ~40–41 ~39–40 Ships, some power plants
Biodiesel (FAME) ~37 ~33
Ethanol ~27 ~21 About two-thirds of petrol per litre
Methanol ~20 ~16
Ammonia, liquid ~18.6 ~12.7 Carbon-free shipping fuel candidate
Bituminous coal 24–30 ~20–25 (bulk) Depends heavily on grade
Lignite 8–15 High moisture content
Wood, air-dried / pellets 15–17 ~11 (pellets, bulk) Oven-dry wood ~18–19 MJ/kg
Lithium-ion cells 0.5–1.0 1.1–2.5 150–270 Wh/kg, 300–700 Wh/L
Lead-acid battery ~0.11–0.14 ~0.3
Water lifted 100 m (pumped hydro) ~0.001 ~0.001 1 m³ at 100 m head ≈ 0.27 kWh
Enriched uranium fuel in a light-water reactor ~3.5–4 million At ~40–45 GWd/t burnup

Sources: US DOE Alternative Fuels Data Center, IPCC 2006 default net calorific values, World Nuclear Association. See also the glossary entries for energy density and calorific value.

Higher vs lower heating value

Burning a hydrogen-containing fuel makes water vapour. If the exhaust is cooled enough to condense that vapour, it gives back extra heat. The higher heating value (HHV), also called gross calorific value, includes that heat. The lower heating value (LHV), or net calorific value, does not.

Fuel HHV / LHV ratio
Coal ~1.03–1.05
Petrol, diesel ~1.06–1.07
Natural gas ~1.11
Hydrogen ~1.18

Europe and the IEA mostly quote LHV for engines and power plants, while North American gas trade and many gas bills use HHV. A condensing boiler that claims “107% efficiency” is quoting on an LHV basis while recovering some of the HHV extra. Always check the basis before comparing efficiencies.

Worked example: a fuel tank vs a battery

Petrol tank: 50 L × 32.5 MJ/L = 1,625 MJ ≈ 450 kWh (mass ≈ 50 × 0.74 = 37 kg of fuel) Engine efficiency ~25% → useful energy at the wheels ≈ 0.25 × 450 ≈ 113 kWh

EV battery: 75 kWh pack at ~170 Wh/kg (pack level) → mass ≈ 75,000 ÷ 170 ≈ 440 kg Drivetrain efficiency ~88% → useful energy at the wheels ≈ 0.88 × 75 ≈ 66 kWh

Mass per useful kWh: petrol ≈ 37 ÷ 113 ≈ 0.33 kg/kWh, battery ≈ 440 ÷ 66 ≈ 6.7 kg/kWh (about 20× heavier)

For a car, carrying an extra 400 kg is acceptable: the motor is lighter than an engine and gearbox, and recharging at home is cheap. For a long-haul aircraft that already carries up to 40% of its take-off weight as fuel, it is not. Compare running costs and emissions for your own car with the EV vs petrol car calculator.

Why it matters for aviation and shipping

Aviation. A wide-body jet on a 12-hour flight burns well over 100 tonnes of kerosene. Replacing that with batteries at 1 MJ/kg would mean thousands of tonnes, which is impossible. Hydrogen saves weight but needs about four times the tank volume of kerosene even as a cryogenic liquid, which forces new airframes. That is why the industry is betting on drop-in sustainable aviation fuel (SAF) for long-haul routes, with batteries limited to small short-range aircraft. See the biofuels guide.

Shipping. Ships care about volume. Liquid ammonia holds about 12.7 MJ/L and methanol about 16 MJ/L, against about 36–40 MJ/L for marine diesel and heavy fuel oil. A ship switching to ammonia needs roughly three times the tank space for the same range, or more frequent bunkering. LNG, at around 21 MJ/L, needs insulated tanks but already powers hundreds of vessels. More on ammonia as a fuel.

Road transport. Cars and vans are where batteries win, because daily distances are short and electric drivetrains waste so little. Long-haul trucks are now in play too, as packs get denser and megawatt charging arrives.

Gases: compression and liquefaction

Natural gas and hydrogen need to be squeezed or chilled to be useful as transport fuels. That costs energy:

  • Compressing hydrogen to 700 bar uses roughly 10–15% of its energy content.
  • Liquefying hydrogen uses roughly 25–35%.
  • Liquefying natural gas uses roughly 8–12% of the gas, which is part of why LNG carries a higher footprint than pipeline gas.

These losses come on top of production losses. For hydrogen made by electrolysis, they help explain why a hydrogen car uses two to three times more electricity per kilometre than a battery car. The hydrogen colours guide covers how it is made.

Nuclear: density in a different league

Fission releases energy from atomic nuclei rather than chemical bonds. Completely fissioning a kilogram of uranium-235 would release about 80 million MJ. Real reactor fuel contains only 3–5% U-235 and is removed long before it is used up, but even so, a light-water reactor extracts about 3.5–4 million MJ of heat from each kilogram of fuel. A single fuel pellet of about 7 grams produces roughly as much energy as a tonne of coal. The trade-off is the complex fuel cycle described in the nuclear fuel cycle guide.

Key takeaways

  • Check whether a figure is per kilogram or per litre, and whether it uses LHV or HHV, before comparing fuels.
  • Liquid hydrocarbons combine high density on both measures with easy handling. That is why they still dominate aviation and shipping.
  • Batteries store 45–80 times less energy per kilogram than petrol but use it about three times better. Fine for cars, not for long-haul flights.
  • Hydrogen is light but bulky, and compressing or liquefying it costs a lot of energy.
  • Nuclear fuel is millions of times denser than chemical fuels, which is why fuel transport is a minor part of nuclear power’s cost.

Convert between MJ, kWh, BTU and toe with the energy unit converter.

Calculators for this topic

Frequently asked questions

Which fuel has the highest energy density?
Per kilogram, hydrogen leads among chemical fuels at about 120 MJ/kg (lower heating value), nearly three times petrol. Per litre it is poor: even liquid hydrogen holds only about 8.5 MJ/L against roughly 32 MJ/L for petrol. Nuclear fuel is in another league, releasing millions of megajoules per kilogram in a reactor.
What is the energy density of petrol and diesel?
Petrol holds about 43–44 MJ/kg (lower heating value), or roughly 32–33 MJ per litre. Diesel holds about 43 MJ/kg and roughly 36 MJ/L because it is denser. A litre of diesel therefore contains about 10–15% more energy than a litre of petrol.
How does a lithium-ion battery compare with petrol?
Good lithium-ion cells store about 150–270 Wh/kg, or 0.5–1.0 MJ/kg, roughly 45–80 times less than petrol by weight. Electric drivetrains are about three times more efficient than engines, which narrows the practical gap to around 15–25 times for the energy storage itself.
What is the difference between LHV and HHV?
The higher heating value (HHV) counts all heat released by burning a fuel, including the heat recovered by condensing the water vapour in the exhaust. The lower heating value (LHV) leaves it out. The gap is about 6–7% for oil products, about 10% for natural gas and about 18% for hydrogen.
Why can't planes run on batteries?
Weight. Jet fuel carries about 43 MJ/kg while today's best battery cells carry around 1 MJ/kg, and a plane's battery does not get lighter as it empties. Short flights of up to a few hundred kilometres with small aircraft are possible, but long-haul aviation will rely on liquid fuels such as sustainable aviation fuel for decades.
How much energy is in a kilogram of uranium?
In a typical light-water reactor, a kilogram of enriched fuel releases about 3.5–4 million MJ of heat over its life at a burnup of 40–45 GWd per tonne. Counted per kilogram of natural uranium mined, which needs enrichment, it works out to several hundred thousand megajoules, still around 10,000 times more than oil.

Sources & references

  1. U.S. DOE Alternative Fuels Data Center — Fuel Properties Comparison
  2. IPCC (2006). Guidelines for National Greenhouse Gas Inventories, Vol. 2, Ch. 1: net calorific values
  3. World Nuclear Association — Heat values of various fuels
  4. IEA — Global EV Outlook 2025 (battery technology trends)
  5. Engineering ToolBox — Fuels: higher and lower calorific values

Figures in this guide are typical ranges drawn from the sources above; your own numbers depend on location, prices and equipment. Use the linked calculators for site-specific estimates.