How this heating oil calculator works
Oil heating has a rhythm gas heating does not: you pay in large lumps when the tanker comes, and the tank empties fast in January and slowly in July. This calculator turns your yearly oil use into the numbers that matter for planning: cost per year and per month, how many fills you need, how long a full tank lasts in mid-winter, and what each kWh of heat really costs once boiler losses are counted.
If you know how many litres you use, enter them; your delivery notes for the past year are the best source. If you only know your heat demand in kWh (from an energy certificate or a heat-loss survey), switch the mode and the calculator works out the litres from the boiler efficiency. The monthly split uses a typical temperate heating profile in which January takes 16.5% of the year’s oil and July about 1.5%, with hot water keeping summer use above zero.
The formula
Cost per kWh of heat = price ÷ (10 kWh/L × efficiency) CO₂ = litres × 2.68 kg/L Condensing saving = (litres − useful heat ÷ new efficiency ÷ 10) × price
Worked example
With the defaults, the house burns 2,200 litres a year in a boiler with 82% seasonal efficiency, oil costs €1.10 per litre, the usable tank holds 1,200 L and the service costs €150.
- Oil cost: 2,200 × €1.10 = €2,420 a year, €2,570 with servicing, or about €214 a month spread evenly.
- Tank fills: 2,200 ÷ 1,200 = 1.8 fills a year, each costing about €1,320.
- January use: 16.5% of 2,200 = 363 L, about 11.7 L a day, so a full tank lasts roughly 102 days if it is filled at the start of winter.
- Useful heat: 2,200 × 10 × 0.82 ≈ 18,040 kWh, so each kWh of heat costs €0.134.
- CO₂: 2,200 × 2.68 ≈ 5.9 tonnes a year.
A condensing boiler at 93% would need about 1,940 litres for the same heat, saving roughly €286 a year. At €4,500 installed, it pays back in about 15.7 years on fuel alone.
How to read the results
- Heating oil cost per year excludes servicing; the hint adds it.
- Tank fills per year and cost per full tank help you budget for deliveries.
- A full tank lasts in January is the shortest gap between deliveries you should plan for. If it is under a month, a bigger tank or a second one may save on delivery charges and let you buy when prices are low.
- Cost per kWh of heat is the figure to compare with gas, a heat pump or wood. Run heating cost comparison with the same number.
Typical values
| Item | Typical value |
|---|---|
| Energy in heating oil / kerosene | 10.0–10.35 kWh per litre (net) |
| Old non-condensing boiler, seasonal | 70–85% |
| Condensing oil boiler, seasonal | 90–95% |
| Domestic tank size | 1,000–2,500 L (usable ≈ 90%) |
| CO₂ per litre burned | about 2.68 kg |
| Typical yearly use, detached house | 1,500–3,000 L |
Tips to spend less on heating oil
- Buy off-season and in bulk. A larger delivery usually gets a lower price per litre, and summer prices are often lower than mid-winter ones.
- Service the boiler. A sooty heat exchanger or a badly set burner can cost several points of efficiency.
- Insulate and draught-proof first. Every kWh of heat you do not need saves about €0.13 at these prices. See insulation savings.
- Consider the switch carefully. If the boiler is near the end of its life, compare a condensing oil boiler with a heat pump using boiler efficiency savings and heat pump vs gas boiler, which handles any fuel price.
- Check deliveries by weight. Oil is sold by volume corrected to 15 °C; the fuel weight calculator converts between litres and kilograms.
Limitations
The monthly profile is a typical temperate one; a Nordic or mountain house has a longer season and a coastal one a shorter, flatter one. Use degree days for your own location. Oil prices are held constant, and the energy content is a single value for gas oil and kerosene. Days per tank assume the tank is full at the start of January and that use is spread evenly across the month, which cold spells will break.
Method & assumptions
Litres = heat demand ÷ (efficiency × 10 kWh/L), or as entered. Cost = litres × price. Tank fills = litres ÷ usable tank volume. Days a tank lasts in January = tank ÷ (January share 16.5% × yearly litres ÷ 31). Cost per kWh of heat = price ÷ (10 kWh/L × efficiency). Condensing saving = (litres − heat ÷ new efficiency ÷ 10) × price.
Frequently asked questions
How much heating oil does a house use per year?
How long does a tank of heating oil last?
How many kWh are in a litre of heating oil?
Is heating oil cheaper than gas or a heat pump?
When is the best time to buy heating oil?
Does a condensing oil boiler save much?
Sources & references
Embed this calculator
Free for blogs, installers, schools and NGOs. Copy the code below; it updates itself automatically.