How the fuel weight calculator works
Fuel is sold at the pump by volume, but much of the fuel trade works by mass: ships bunker tonnes of heavy fuel oil, airlines load kilograms of jet fuel, and wholesale prices are often quoted per tonne. Converting between the two needs the fuel’s density, and density changes with temperature.
Choose one of 15 fuels, say whether you have a volume or a weight, and enter the quantity in litres, cubic metres, US or imperial gallons, kilograms, tonnes or pounds. The calculator uses a typical density at 15 °C for that fuel, or the value from your delivery note if you enter one, corrects it to the fuel’s actual temperature and gives the result in every unit, plus the energy content.
The formula
β is the volumetric expansion coefficient: about 0.00083 per °C for diesel, 0.00095 for petrol, 0.0009 for jet fuel, 0.00065 for heavy fuel oil and 0.0025–0.0029 for liquid LPG and propane.
Worked example
The default is 1,000 litres of diesel at 15 °C, using the typical density of 0.835 kg/L.
- Mass = 1,000 × 0.835 = 835 kg, which is 0.835 tonnes or 1,841 lb
- Volume in other units: 264.2 US gallons, 220.0 imperial gallons
- Weight per US gallon: 0.835 × 3.785 ÷ 0.4536 = 6.97 lb
- Energy: 835 kg × 43.0 MJ/kg ÷ 3.6 = 9,974 kWh
Now set the temperature to 30 °C, a hot summer day. Density falls to 0.835 ÷ (1 + 0.00083 × 15) = 0.8247 kg/L, so the same 1,000 litres weigh 825 kg. That 10 kg gap is why fuel deliveries are invoiced at volumes corrected to 15 °C.
How to read the results
- Weight or volume (headline) is the converted quantity.
- Density used shows the value at your temperature and the specification range for the fuel. If your delivery note shows a density at 15 °C, enter it for a more exact answer.
- Litres at 15 °C appears when the temperature differs from 15 °C. It is the standard volume that traders and tax authorities use.
- Energy content helps compare fuels and size tanks for generators or boilers.
Typical fuel densities at 15 °C
| Fuel | kg/L | Specification range | lb per US gal |
|---|---|---|---|
| Petrol / gasoline | 0.745 | 0.720–0.775 | 6.22 |
| Diesel (EN 590) | 0.835 | 0.820–0.845 | 6.97 |
| Jet A-1 / kerosene | 0.800 | 0.775–0.840 | 6.68 |
| Avgas 100LL | 0.715 | 0.69–0.73 | 5.97 |
| Heavy fuel oil (RMG 380) | 0.985 | 0.95–0.991 | 8.22 |
| LPG autogas | 0.535 | 0.51–0.58 | 4.46 |
| Ethanol | 0.789 | 0.789–0.794 | 6.58 |
| Biodiesel (FAME) | 0.880 | 0.86–0.90 | 7.34 |
Tips
- Pilots: plan fuel by mass. A rule of thumb of 0.8 kg/L for Jet A-1 can be off by 3–4% depending on the batch and the temperature on the ramp.
- Generator and boiler tanks: size by volume but budget by energy. A litre of heavy fuel oil holds more energy than a litre of diesel, but a kilogram holds less.
- LPG: cylinders are filled by weight. To convert a cylinder’s kg into litres of liquid, use the propane or butane setting; for how long it will last, see the LPG cylinder duration calculator.
- Crude oil: density depends strongly on the grade; the oil barrel converter calculates it from API gravity.
For the energy and CO₂ of each fuel per litre or kilogram, use fuel energy content. If you run a diesel generator, the generator fuel calculator turns load into litres per hour.
Limitations
Densities are typical mid-range values within the specifications, not measurements of your fuel. The expansion coefficient is treated as constant, which is accurate to well under 1% over normal ambient temperatures; for custody transfer, the industry uses the API MPMS Chapter 11.1 tables, which vary β with density. LPG composition varies widely between countries (from almost pure propane to mostly butane), so its density and expansion are less certain than for liquid fuels. Pressure effects are ignored except for liquefied gases, which are assumed to be at their vapour pressure.
Method & assumptions
Density at temperature T: ρ(T) = ρ15 ÷ (1 + β × (T − 15 °C)), where β is the volumetric expansion coefficient. Mass = volume × ρ(T); volume = mass ÷ ρ(T). 1 US gallon = 3.785411784 L, 1 imperial gallon = 4.54609 L, 1 lb = 0.45359237 kg. Energy = mass × lower heating value.
Frequently asked questions
How much does 1 litre of diesel weigh?
How much does a litre of petrol weigh?
How many litres are in a tonne of jet fuel?
How much does a gallon of diesel weigh in pounds?
Does fuel weigh more when it is cold?
How many litres of LPG are in a 45 kg cylinder?
Sources & references
Embed this calculator
Free for blogs, installers, schools and NGOs. Copy the code below; it updates itself automatically.