How the oil barrel converter works
Crude oil is traded in barrels, shipped and refined by the tonne, and counted in energy statistics as tonnes of oil equivalent or gigajoules. Converting between volume and mass requires the density of the specific crude, and converting to energy requires its heating value. Both depend mainly on API gravity, so the converter asks for the crude grade.
Pick a benchmark (Brent, WTI, Dubai, Arab Light, Urals, Tapis, Bonny Light, Maya, Western Canadian Select or a light condensate) or enter any API gravity and sulphur content. Enter a quantity in barrels, litres, cubic metres, US gallons, tonnes, toe, GJ or MMBtu. The calculator converts it to barrels first, then to every other unit, and values the cargo at the barrel price you enter.
The formula
Net heating value (MJ/kg, ISO 8217 Annex): (46.704 − 8.802ρ² + 3.167ρ) × (1 − 0.01S) + 0.0942S ρ in t/m³, S = sulphur % Gross heating value (MJ/kg, Cragoe) = 51.916 − 8.792 × SG²
toe = GJ (net) ÷ 41.868 MMBtu = GJ (gross) ÷ 1.055056 boe = 5.8 MMBtu
Worked example
The default is 1,000 barrels of Brent, entered as 38 °API with 0.4% sulphur, valued at 75 per barrel.
- SG = 141.5 ÷ (38 + 131.5) = 0.8348, density 834 kg/m³
- Mass per barrel = 834 × 0.158987 = 132.6 kg, so 7.54 barrels per tonne
- 1,000 barrels = 158,987 litres = 159 m³ = 42,000 US gallons = 132.6 tonnes
- Net heating value = 43.09 MJ/kg, gross 45.79 MJ/kg
- Energy: 132.6 t × 43.09 = 5,713 GJ (net), or about 1,587 MWh, or 136.5 toe
- Gross energy: 5,754 MMBtu, which is 992 boe at the 5.8 MMBtu convention
- Value: 1,000 × 75 = 75,000, or about 566 per tonne
Run the same 1,000 barrels with Western Canadian Select (20.5 °API, 3.5% sulphur) and the cargo weighs about 148 tonnes: heavier oil packs more mass into each barrel but less energy into each kilogram.
How to read the results
- Barrels per tonne is the number traders and analysts quote most often. It is the bridge between price per barrel and price per tonne.
- Tonnes of oil equivalent is the unit used in national energy balances, so use it to compare oil with gas, coal or electricity.
- Net vs gross energy: net (lower heating value) excludes the heat in water vapour and is used by the IEA and in Europe; gross (higher heating value) is common in North American statistics and in the boe convention.
Benchmark crudes
| Grade | °API | Sulphur % | bbl/t |
|---|---|---|---|
| Brent Blend | 38 | 0.4 | 7.54 |
| WTI | 40 | 0.3 | 7.63 |
| Arab Light | 33 | 1.9 | 7.32 |
| Dubai / Oman | 31 | 2.0 | 7.23 |
| Tapis (Malaysia) | 45 | 0.03 | 7.85 |
| Maya | 21.5 | 3.4 | 6.81 |
| Western Canadian Select | 20.5 | 3.5 | 6.76 |
Assays are typical values; individual cargoes vary by a degree or two of API.
Tips
- Use the cargo assay when you have one. The certificate of quality gives density at 15 °C and sulphur, which you can enter as a custom grade (convert density to API with the formula above).
- Watch temperature. Barrels are quoted at 60 °F (15.6 °C). Oil expands by about 0.07–0.09% per °C, so an uncorrected volume measured on a hot day overstates the standard volume.
- Don’t mix boe conventions. Some companies convert gas to boe at 6,000 ft³ per barrel, others by energy content.
For refined products by the litre or tonne, use the fuel weight calculator. To convert the energy into other units see the energy unit converter, and to compare a barrel price with gas or electricity prices use the energy price converter.
Limitations
Density and heating values come from correlations, not a laboratory assay. For typical crudes the net heating value is within about 1–2% of measured values, but unusual crudes (very waxy, very high in water or salts) can differ more. Water and sediment content are assumed to be zero. The benchmark API and sulphur figures are representative assays; blends change over time as fields mature. Statistical agencies use rounded average factors (for example 7.33 barrels per tonne and about 1.02 toe per tonne for world crude), so your results will not match published national totals exactly.
Method & assumptions
Specific gravity SG = 141.5 ÷ (°API + 131.5); density = SG × 999.016 kg/m³. Mass per barrel = density × 0.158987 m³. Net heating value (MJ/kg) = (46.704 − 8.802ρ² + 3.167ρ)(1 − 0.01S) + 0.0942S with ρ in t/m³ and S in % (ISO 8217 Annex). Gross value = 51.916 − 8.792 SG² (Cragoe). toe = GJ (net) ÷ 41.868; MMBtu = GJ (gross) ÷ 1.055056.
Frequently asked questions
How many litres are in a barrel of oil?
How many barrels are in a tonne of crude oil?
What is API gravity?
How much energy is in a barrel of oil?
What is a tonne of oil equivalent (toe)?
What is the difference between sweet and sour crude?
Sources & references
Embed this calculator
Free for blogs, installers, schools and NGOs. Copy the code below; it updates itself automatically.