Glossary · Coal

Supercritical and ultra-supercritical

Steam power plants operating above the critical point of water (22.1 MPa, 374 °C); ultra-supercritical units run at about 600 °C and above for efficiencies of 42–47%.

Above the critical point, water turns into steam without boiling, so there is no separate drum. Higher temperatures and pressures raise cycle efficiency, cutting fuel and CO₂ per MWh by roughly 15–25% compared with subcritical plants. Ultra-supercritical (USC) units need nickel-rich steels to survive the heat.

China and Japan operate the largest USC fleets. Malaysia’s Manjung 4 (1,010 MW, 2015) and Jimah East (2 × 1,000 MW, 2019) are ultra-supercritical. Even the best coal plant still emits around 750–800 g CO₂/kWh, about twice a gas combined-cycle plant.

Related terms

All terms →
  • Pulverised coal combustion

    The standard coal power technology: coal is ground to a fine powder and blown into a boiler, where it burns in suspension to raise high-pressure steam.

  • Heat rate

    The fuel energy a thermal power plant consumes per kWh of electricity generated; the inverse of efficiency, usually in BTU/kWh or kJ/kWh.

  • Carbon intensity of electricity

    The mass of CO2 (or CO2e) emitted per unit of electricity generated or consumed, usually expressed in grams per kilowatt-hour (gCO2/kWh).