Glossary · Coal

Coal ash (fly ash and bottom ash)

The mineral residue left after burning coal: fine fly ash captured from flue gas and coarser bottom ash from the boiler floor.

Coal typically contains 5–40% ash by weight, depending on rank and origin; Indian coal is notably high in ash. Fly ash is a useful cement and concrete additive, replacing part of the clinker and cutting cement emissions. In the United States roughly half or more of coal ash is now reused, according to the American Coal Ash Association.

Ash stored in wet ponds can leak arsenic, mercury and other metals into groundwater; the 2008 Kingston, Tennessee spill released over 4 million cubic metres of slurry. Ash also contains small amounts of naturally occurring uranium and thorium.

Related terms

All terms →
  • Electrostatic precipitator (ESP)

    A device that removes fly ash and dust from flue gas by charging the particles and collecting them on earthed plates, typically capturing over 99% of particulates.

  • Pulverised coal combustion

    The standard coal power technology: coal is ground to a fine powder and blown into a boiler, where it burns in suspension to raise high-pressure steam.

  • Sub-bituminous coal

    A lower-rank coal between lignite and bituminous, with roughly 35–45% carbon, higher moisture and about 18–24 MJ/kg as received.

  • Supercritical and ultra-supercritical

    Steam power plants operating above the critical point of water (22.1 MPa, 374 °C); ultra-supercritical units run at about 600 °C and above for efficiencies of 42–47%.

  • Thermal (steam) coal

    Coal burned to raise steam for electricity and industrial heat, priced by energy content against benchmarks such as Newcastle and API2.