Glossary · Oil & gas

Hydrocracking

A refinery process that cracks heavy oils under high hydrogen pressure over a catalyst, producing low-sulphur diesel, jet fuel and naphtha.

Hydrocrackers operate at roughly 100–200 bar and 350–450 °C. Adding hydrogen while cracking saturates the products and strips out sulphur and nitrogen, so the output is clean, high-cetane diesel and good-quality jet fuel. Hydrocracking suits diesel-hungry markets in Europe and Asia, while FCC favours petrol.

The hydrogen usually comes from steam methane reforming, which makes hydrocrackers and hydrotreaters the biggest users of grey hydrogen outside ammonia plants and an early target for low-carbon hydrogen.

Related terms

All terms →
  • Fluid catalytic cracking (FCC)

    A refinery conversion process that breaks heavy gas oil molecules into petrol, LPG and light olefins over a hot powdered catalyst.

  • Diesel (gas oil)

    A middle distillate fuel for compression-ignition engines, trucks, ships, generators and farm machinery, with about 36–38 MJ per litre.

  • Grey hydrogen

    Hydrogen made from natural gas by steam methane reforming without carbon capture; the dominant and cheapest production route today.

  • Sweet and sour crude

    Industry terms for crude oil with low sulphur content (sweet, usually under 0.5%) and high sulphur content (sour, usually above about 1%).