Glossary · Oil & gas

Fluid catalytic cracking (FCC)

A refinery conversion process that breaks heavy gas oil molecules into petrol, LPG and light olefins over a hot powdered catalyst.

In an FCC unit, heavy feed meets a fluidised zeolite catalyst at around 500–550 °C in a riser reactor for a few seconds. The long hydrocarbon chains crack into shorter ones. Coke deposited on the catalyst is burned off in a regenerator, which supplies the heat for the reaction. The first commercial unit started in Baton Rouge, Louisiana, in 1942 to make aviation fuel.

FCC is the workhorse of petrol-oriented refineries, especially in the United States, and an important source of propylene for plastics. It is also one of the largest CO₂ point sources inside a refinery because of the coke burn.

Related terms

All terms →
  • Hydrocracking

    A refinery process that cracks heavy oils under high hydrogen pressure over a catalyst, producing low-sulphur diesel, jet fuel and naphtha.

  • Crude distillation unit

    The first and largest unit in a refinery, which heats crude oil and separates it by boiling point into fractions such as gases, naphtha, kerosene, diesel and residue.

  • Petrol (gasoline)

    A light, volatile motor fuel for spark-ignition engines, blended from several refinery streams and rated by octane; about 32–34 MJ per litre.

  • Nelson complexity index

    A score that compares a refinery’s secondary processing units with its crude distillation capacity, used to rank how much high-value product it can squeeze from a barrel.