Decay heat
Heat produced by radioactive decay of fission products after a reactor shuts down: about 6–7% of full thermal power at first, around 1% after a few hours.
A 3,000 MW-thermal reactor still makes roughly 200 MW of heat seconds after shutdown, about 40 MW after an hour and around 20 MW after a day. That heat must be removed for days, or the fuel overheats. At Fukushima Daiichi in March 2011, the tsunami knocked out the power and pumps needed for cooling, and three cores melted even though the reactors had shut down correctly.
Passive designs such as the AP1000 use gravity, natural circulation and large water tanks to remove decay heat without pumps or operator action for about three days. Spent fuel also needs years of pool cooling before dry cask storage.
Related terms
All terms →- Control rod
A rod of neutron-absorbing material inserted into or withdrawn from a reactor core to control or stop the chain reaction.
- Spent nuclear fuel
Fuel assemblies removed from a reactor after use, highly radioactive and thermally hot, containing uranium, plutonium, fission products and minor actinides.
- Dry cask storage
Storing spent nuclear fuel in sealed steel canisters inside concrete or steel casks, cooled by natural air circulation, after several years in a cooling pool.