Control rod
A rod of neutron-absorbing material inserted into or withdrawn from a reactor core to control or stop the chain reaction.
Control rods contain boron carbide, silver-indium-cadmium alloy or hafnium, which soak up neutrons. Inserting them lowers reactivity; withdrawing them raises it. In an emergency shutdown (scram), all rods drop or are driven in within seconds. PWRs also adjust boric acid in the coolant for slow control.
Shutting down the chain reaction does not stop all heat, because fission products keep decaying; see decay heat.
Related terms
All terms →- Neutron moderator
A material in a reactor core that slows fast neutrons from fission so they are more likely to split further U-235 nuclei.
- Decay heat
Heat produced by radioactive decay of fission products after a reactor shuts down: about 6–7% of full thermal power at first, around 1% after a few hours.
- Criticality
The state of a reactor in which each fission causes, on average, exactly one more fission, so the chain reaction is self-sustaining and steady.