Glossary · Nuclear

Criticality

The state of a reactor in which each fission causes, on average, exactly one more fission, so the chain reaction is self-sustaining and steady.

The effective multiplication factor keff describes the chain reaction: below 1 it dies away (subcritical), at 1 it holds steady (critical), above 1 it grows (supercritical). A reactor running normally at full power is exactly critical. Operators raise power by making it briefly supercritical, then return to k = 1.

Control is possible because a small fraction of neutrons (about 0.65% for U-235) are emitted seconds after fission rather than instantly. These delayed neutrons slow the response enough for control rods to act. A new reactor “reaching first criticality” marks the start of its chain reaction.

Related terms

All terms →
  • Control rod

    A rod of neutron-absorbing material inserted into or withdrawn from a reactor core to control or stop the chain reaction.

  • Neutron moderator

    A material in a reactor core that slows fast neutrons from fission so they are more likely to split further U-235 nuclei.

  • Nuclear fission

    The splitting of a heavy atomic nucleus such as uranium-235 or plutonium-239 into lighter nuclei after absorbing a neutron, releasing about 200 MeV of energy and further neutrons.