Glossary · Oil & gas

Hydraulic fracturing (fracking)

Pumping water, sand and small amounts of chemicals into a well at high pressure to crack open low-permeability rock so that oil or gas can flow.

Fracturing fluid is typically about 90% water, 9% sand or ceramic proppant that holds the cracks open, and under 1% additives. Combined with long horizontal wells, often 3 km or more laterally, fracking made shale and other tight rocks commercial. A single modern shale well often uses tens of thousands of cubic metres of water, and volumes per well have grown as laterals got longer, according to US Geological Survey studies.

Concerns include water use, wastewater disposal (linked to induced earthquakes in Oklahoma), methane leaks and local disruption. France banned fracking in 2011; England has had a moratorium since 2019. See shale and fracking explained.

Related terms

All terms →
  • Tight oil (shale oil)

    Light crude produced from low-permeability shale or sandstone formations using horizontal drilling and hydraulic fracturing.

  • Shale gas

    Natural gas trapped in fine-grained shale rock and produced with horizontal drilling and hydraulic fracturing.

  • Methane leakage

    Unintended release of methane from oil, gas and coal supply chains through leaks, venting and incomplete flaring, often expressed as a percentage of gas produced.

  • Recovery factor

    The share of the oil or gas originally in a reservoir that can actually be produced, typically 20–40% for oil and 70–90% for conventional gas.