Glossary · Heating & buildings

High-temperature (industrial) heat pump

A heat pump that supplies heat or steam at about 100–200 °C for industrial processes, using waste heat or ambient heat as its source.

Industrial heat pumps use refrigerants such as hydrofluoro-olefins, butane or water vapour and often recover heat from cooling water or exhaust air. When the temperature lift is small, the COP can reach 3–5; supplying steam at 150–200 °C gives lower COPs, around 1.5–2.5. Food, drinks, paper, chemicals and textiles have large demand in this temperature range.

The IEA estimates that heat pumps could technically supply a significant share of industrial process heat below 200 °C. See industrial heat explained.

Related terms

All terms →
  • Heat pump

    A device that uses a refrigeration cycle to move heat from a cooler source (air, ground, water) to a warmer sink, delivering 2–5 units of heat per unit of electricity.

  • COP (Coefficient of Performance)

    The ratio of useful heat (or cooling) delivered by a heat pump to the electrical energy it consumes, measured at a specific operating point.

  • Waste heat recovery

    Capturing heat that industrial processes, power plants or data centres would otherwise release to air or water, and reusing it for heating or power.