Grid code
The technical rules every generator, storage system and large consumer must meet to connect to and operate on a power grid.
Grid codes set requirements for voltage and frequency ranges, fault ride-through (staying connected during short faults), reactive power, ramping, protection settings and data exchange. In the EU they are harmonised through network codes such as Requirements for Generators (RfG); national operators add detail. Malaysia’s Grid Code is issued by the Energy Commission.
As inverter-based solar, wind and batteries replace synchronous machines, grid codes are adding requirements for synthetic inertia and grid-forming capability.
Related terms
All terms →- Grid-forming inverter
An inverter that sets its own voltage and frequency reference, behaving like a voltage source that can stabilise weak grids and provide synthetic inertia.
- Reactive power
The component of AC power that oscillates between source and load without doing net work, needed to sustain magnetic and electric fields and control voltage.
- Grid frequency
The rate at which alternating current changes direction on a power system, 50 Hz or 60 Hz, which reflects the instantaneous balance of supply and demand.